Total energy difference between VASP5.2.12 et VASP5.3.3

Problems running VASP: crashes, internal errors, "wrong" results.


Moderators: Global Moderator, Moderator

Post Reply
Message
Author
mrubes
Newbie
Newbie
Posts: 5
Joined: Mon Feb 11, 2013 10:02 am

Total energy difference between VASP5.2.12 et VASP5.3.3

#1 Post by mrubes » Mon Feb 11, 2013 10:17 am

Dear Vasp users

I have a problem with total energy difference between versions of VASP(5.2.12) and VASP(5.3.3) on a complex containgin Cu2+ and two COO- groups . All input files are the same and 5.2.12 yields F=-.69351994E+02 and 5.3.3 version F= -.66206113E+02. I am using ISMEAR=1 and Sigma=0.1 in the INCAR file. However the band occupancies in 5.3.3 version are wierd (seem to be partially populatig 4s orbital on Cu). Thus what changed between versions. Also calculating only benzene molecule yielded same total energies between version, thus the problem sems to be connected with dublet state of Cu2+.

Thank you for your comments and thougts on this.
Last edited by mrubes on Mon Feb 11, 2013 10:17 am, edited 1 time in total.

struckru
Newbie
Newbie
Posts: 2
Joined: Tue Oct 23, 2012 12:51 pm

Total energy difference between VASP5.2.12 et VASP5.3.3

#2 Post by struckru » Fri Feb 15, 2013 7:01 pm

I also have the same problem. The total energy difference in my case between version of vasp 5.2.12 and vasp 5.3.3.18 is about 8.4 eV for NiMnSb cell containing 12 atoms. All the input files are exactly same too.
Last edited by struckru on Fri Feb 15, 2013 7:01 pm, edited 1 time in total.

admin
Administrator
Administrator
Posts: 2921
Joined: Tue Aug 03, 2004 8:18 am
License Nr.: 458

Total energy difference between VASP5.2.12 et VASP5.3.3

#3 Post by admin » Mon Feb 18, 2013 3:46 pm

Changes implemented in vasp.5.3.3 are described in www.vasp.at.
There is no reason for large differences in total energies by 5.3.3 and 5.2.12 version.
Last edited by admin on Mon Feb 18, 2013 3:46 pm, edited 1 time in total.

mrubes
Newbie
Newbie
Posts: 5
Joined: Mon Feb 11, 2013 10:02 am

Total energy difference between VASP5.2.12 et VASP5.3.3

#4 Post by mrubes » Mon Feb 18, 2013 9:12 pm

Ok that's what I would think that there is no reason for that but me and strucru got different results between versions (5.2.12 and 5.3.3) for different systems. What puzzles me that I got the same total energies between versions for example for water and benzene crystal, but different for example for CuBTC mof and probably for other metals as strucru. Thus any ideal where shall I look to fix the problem.
Last edited by mrubes on Mon Feb 18, 2013 9:12 pm, edited 1 time in total.

mrubes
Newbie
Newbie
Posts: 5
Joined: Mon Feb 11, 2013 10:02 am

Total energy difference between VASP5.2.12 et VASP5.3.3

#5 Post by mrubes » Tue Feb 19, 2013 11:48 am

To further simlify my problem I just run simply Cu and O atom in (20x20x20) cubic cell. The numbers in 5.3.3 version are complete nonsense for Cu with either new or older potcar files. For O atom same results for both VASP versions. The problem seem to be connected with Cu POTCAR files. Any ideas?
Last edited by mrubes on Tue Feb 19, 2013 11:48 am, edited 1 time in total.

struckru
Newbie
Newbie
Posts: 2
Joined: Tue Oct 23, 2012 12:51 pm

Total energy difference between VASP5.2.12 et VASP5.3.3

#6 Post by struckru » Tue Feb 19, 2013 12:52 pm

of course I am aware of the changes of the new version comparing to the old one at the VASP webpage. That is why very strange that there does exist a big difference in total energy in my case (NiMnSb), although all the input files are exactly same including INCAR, POTCAR, POSCAR, and KPOINTS for the calculation with VASP 5.2.12 and VASP 5.3.3.18 in the following:

INCAR:
--------------
SYSTEM = bluk NiMnSb PAW-PBE
ISTART = 0
ICHARG = 2
ISPIN = 2
ISMEAR = -5
SIGMA = 0.2
ENCUT = 450
PREC = Accurate
NSW = 0
IBRION = -1
ISIF = 2
EDIFF = 1E-04
ALGO = Fast
LREAL = .FALSE.
-------------------

POSCAR:
------------------
NiMnSb bulk
5.90699
1.0000000000 0.0000000000 0.0000000000
0.0000000000 1.0000000000 0.0000000000
0.0000000000 0.0000000000 1.0000000000
4 4 4
Direct
0.000000000 0.000000000 0.000000000
0.000000000 0.500000000 0.500000000
0.500000000 0.000000000 0.500000000
0.500000000 0.500000000 0.000000000
0.250000000 0.250000000 0.250000000
0.750000000 0.750000000 0.250000000
0.750000000 0.250000000 0.750000000
0.250000000 0.750000000 0.750000000
0.750000000 0.750000000 0.750000000
0.250000000 0.250000000 0.750000000
0.250000000 0.750000000 0.250000000
0.750000000 0.250000000 0.250000000
----------------------

KPOINTS:
-----------------
K-Points
0
Monkhorst Pack
5 5 5
0 0 0
------------------

the exactly same POTCAR is chosen for these 2 versions (vasp 5.2.12 & 5.3.3.18), the resulting total energies are as follows:

for vasp 5.2.12:
-------------------
N E dE d eps ncg rms rms(c)
DAV: 1 0.658345367286E+03 0.65835E+03 -0.31130E+04 2320 0.145E+03
DAV: 2 -0.120656567762E+02 -0.67041E+03 -0.64905E+03 2320 0.385E+02
DAV: 3 -0.723176637462E+02 -0.60252E+02 -0.54311E+02 2674 0.144E+02
DAV: 4 -0.773985488885E+02 -0.50809E+01 -0.46722E+01 3596 0.381E+01
DAV: 5 -0.776050822040E+02 -0.20653E+00 -0.19697E+00 3426 0.775E+00 0.278E+01
RMM: 6 -0.813402470224E+02 -0.37352E+01 -0.13706E+02 2356 0.874E+01 0.174E+01
RMM: 7 -0.765136977204E+02 0.48265E+01 -0.18538E+01 2323 0.394E+01 0.122E+01
RMM: 8 -0.767111512430E+02 -0.19745E+00 -0.43568E+00 2482 0.112E+01 0.754E+00
RMM: 9 -0.768457804865E+02 -0.13463E+00 -0.21370E+00 2715 0.656E+00 0.627E+00
RMM: 10 -0.770295144022E+02 -0.18373E+00 -0.19927E-01 2590 0.250E+00 0.127E+00
RMM: 11 -0.770121340708E+02 0.17380E-01 -0.11362E-01 2827 0.132E+00 0.107E+00
RMM: 12 -0.770135266675E+02 -0.13926E-02 -0.17106E-02 2834 0.773E-01 0.464E-01
RMM: 13 -0.770140684964E+02 -0.54183E-03 -0.29962E-03 2666 0.344E-01 0.119E-01
RMM: 14 -0.770139980471E+02 0.70449E-04 -0.60870E-04 2271 0.137E-01
1 F= -.77013998E+02 E0= -.77013998E+02 d E =0.000000E+00 mag= 16.0094
----------------------------------

for vasp 5.3.3.18:
----------------------------------
N E dE d eps ncg rms rms(c)
DAV: 1 0.668601467897E+03 0.66860E+03 -0.30980E+04 2320 0.145E+03
DAV: 2 -0.619827625737E+01 -0.67480E+03 -0.65323E+03 2320 0.386E+02
DAV: 3 -0.683490300356E+02 -0.62151E+02 -0.55987E+02 2756 0.146E+02
DAV: 4 -0.736465675782E+02 -0.52975E+01 -0.48490E+01 3632 0.400E+01
DAV: 5 -0.738599508874E+02 -0.21338E+00 -0.20705E+00 3494 0.812E+00 0.335E+01
RMM: 6 -0.760504360618E+02 -0.21905E+01 -0.18115E+02 2381 0.998E+01 0.370E+01
RMM: 7 -0.702844197092E+02 0.57660E+01 -0.46987E+01 2342 0.452E+01 0.298E+01
RMM: 8 -0.690995549784E+02 0.11849E+01 -0.11544E+01 2332 0.242E+01 0.209E+01
RMM: 9 -0.689187486396E+02 0.18081E+00 -0.28673E+00 2638 0.965E+00 0.894E+00
RMM: 10 -0.684954362641E+02 0.42331E+00 -0.17707E+00 2640 0.586E+00 0.344E+00
RMM: 11 -0.684738678174E+02 0.21568E-01 -0.86346E-01 2645 0.522E+00 0.191E+00
RMM: 12 -0.685134369680E+02 -0.39569E-01 -0.19727E-01 3116 0.158E+00 0.112E+00
RMM: 13 -0.684969629995E+02 0.16474E-01 -0.30791E-02 2609 0.128E+00 0.461E-01
RMM: 14 -0.684935621991E+02 0.34008E-02 -0.90311E-03 3165 0.347E-01 0.173E-01
RMM: 15 -0.684943724273E+02 -0.81023E-03 -0.68507E-04 2371 0.120E-01 0.609E-02
RMM: 16 -0.684952744046E+02 -0.90198E-03 -0.19722E-04 1645 0.943E-02 0.427E-02
RMM: 17 -0.684956635319E+02 -0.38913E-03 -0.72346E-05 1478 0.679E-02 0.310E-02
RMM: 18 -0.684960147029E+02 -0.35117E-03 -0.52423E-05 1443 0.528E-02 0.206E-02
RMM: 19 -0.684959281074E+02 0.86596E-04 -0.25384E-05 1411 0.465E-02
1 F= -.68495928E+02 E0= -.68495928E+02 d E =0.000000E+00 mag= 15.9997
---------------------------------

As you can see, there is a big difference in total energy even with the same POTCAR. So I think POTCAR is not the problem. As for what causes the problem which seems only happen to metal system, any ideas?
Last edited by struckru on Tue Feb 19, 2013 12:52 pm, edited 1 time in total.

admin
Administrator
Administrator
Posts: 2921
Joined: Tue Aug 03, 2004 8:18 am
License Nr.: 458

Total energy difference between VASP5.2.12 et VASP5.3.3

#7 Post by admin » Tue Feb 19, 2013 3:26 pm

NiMnSb, PAW-PBE, 5x5x5
vasp.5.2.12: 1 F= -.77456625E+02 E0= -.77456625E+02 d E =0.000000E+00 mag= 15.9961
vasp.5.3.3: 1 F= -.77456625E+02 E0= -.77456625E+02 d E =0.000000E+00 mag= 15.9961
Last edited by admin on Tue Feb 19, 2013 3:26 pm, edited 1 time in total.

mrubes
Newbie
Newbie
Posts: 5
Joined: Mon Feb 11, 2013 10:02 am

Total energy difference between VASP5.2.12 et VASP5.3.3

#8 Post by mrubes » Tue Feb 19, 2013 3:30 pm

Ok thus the results admin posts clearly indicates compilation issues. Thanks
Last edited by mrubes on Tue Feb 19, 2013 3:30 pm, edited 1 time in total.

mrubes
Newbie
Newbie
Posts: 5
Joined: Mon Feb 11, 2013 10:02 am

Total energy difference between VASP5.2.12 et VASP5.3.3

#9 Post by mrubes » Sat Feb 23, 2013 3:22 am

Issue resolved after updating to the latest version of ifc. The problem was with our ifc(2011.5.220) version, which when combined with openmpi lead to this behavior. The single-proccesor version yielded correct results even with ifc(2011.5.220).
Last edited by mrubes on Sat Feb 23, 2013 3:22 am, edited 1 time in total.

Post Reply