How to optimize the configuration: NUMA=NPS4
Moderators: Global Moderator, Moderator
-
Yong ZUO
- Newbie
- Posts: 3
- Joined: Wed Apr 03, 2024 7:55 am
How to optimize the configuration: NUMA=NPS4
How to optimize the configuration: NUMA=NPS4, oneapi+6.4.3 runs error: mpirun IPL WARN> Can not detect NUMA nodes for all cores. Check if RAM of all NUMA nodes is available, it can be normal when configuring NUMA=NPS2 run
-
michael_wolloch
- Global Moderator
- Posts: 110
- Joined: Tue Oct 17, 2023 10:17 am
Re: How to optimize the configuration: NUMA=NPS4
Dear Yong Zuo,
I think this issue is related to a hardware configuration. Am I correct in thinking that you want to use 4 NUMA domains per CPU on an EPYC platform and get an error when running the mpirun command? Note that the NUMA configuration is set in the BIOS, so you might need to contact your system administrator or HPC facility to figure out what setting is used and if it might be changed.
Which NUMA configuration would be the most efficient for your use case is a different question that would need some thorough benchmarking to figure out.
If I am mistaken in my assessment of your question, please do not hesitate to reach out again.
All the best, Michael
I think this issue is related to a hardware configuration. Am I correct in thinking that you want to use 4 NUMA domains per CPU on an EPYC platform and get an error when running the mpirun command? Note that the NUMA configuration is set in the BIOS, so you might need to contact your system administrator or HPC facility to figure out what setting is used and if it might be changed.
Which NUMA configuration would be the most efficient for your use case is a different question that would need some thorough benchmarking to figure out.
If I am mistaken in my assessment of your question, please do not hesitate to reach out again.
All the best, Michael