About magnetic anisotropy calculation
Moderators: Global Moderator, Moderator
About magnetic anisotropy calculation
Hi, guys. I face some difficulties about the magnetic anisotropy calculation about Co hcp now. I carry out the process as below, but find the MAE is much smaller than the experiment value. Is there any mistake in my calculation method?
My process:
First:
optimize the hcp Co structure (in spin polarized method)
Then:
carry out one static calculation: K points is 19*19*19,
PREC = high
ISTART = 0
ICHARG = 2
ISYM = 0
VOSKOWN = 1 (PW91 is used)
ISPIN = 2
MAGMOM = 3 3
ISMEAR = -5
LORBIT = 11
EDIFF = 0.1E-05
And then, I get the CHGCAR and WAVECAR, and do further calculation according to the manual. I set the INCAR file:
PREC = high
ISTART = 1 (read from WAVECAR)
ICHARG = 11 (read from CHGCAR)
ISYM = 0
VOSKOWN = 1
ISPIN = 2
MAGMOM = 0 0 3 0 0 3
LORBMOM = .TRUE.
LNONCOLLINEAR= .TRUE.
LSORBIT = .TRUE.
SAXIS = 0 0 1 (magnetic direction)
NBANDS = 32 (twice in static calculation)
After that, I change the SAXIS to (1 0 0) and (0 1 0) to get three direction's total energy.
I find the difference between (001) and (100) total energy is in 10^(-6)eV order, but in former experiment and calculation, the result is 10^(-5)eV order.
Why there are so huge difference?
Is my calculation method correct?
Thank you in advance~
My process:
First:
optimize the hcp Co structure (in spin polarized method)
Then:
carry out one static calculation: K points is 19*19*19,
PREC = high
ISTART = 0
ICHARG = 2
ISYM = 0
VOSKOWN = 1 (PW91 is used)
ISPIN = 2
MAGMOM = 3 3
ISMEAR = -5
LORBIT = 11
EDIFF = 0.1E-05
And then, I get the CHGCAR and WAVECAR, and do further calculation according to the manual. I set the INCAR file:
PREC = high
ISTART = 1 (read from WAVECAR)
ICHARG = 11 (read from CHGCAR)
ISYM = 0
VOSKOWN = 1
ISPIN = 2
MAGMOM = 0 0 3 0 0 3
LORBMOM = .TRUE.
LNONCOLLINEAR= .TRUE.
LSORBIT = .TRUE.
SAXIS = 0 0 1 (magnetic direction)
NBANDS = 32 (twice in static calculation)
After that, I change the SAXIS to (1 0 0) and (0 1 0) to get three direction's total energy.
I find the difference between (001) and (100) total energy is in 10^(-6)eV order, but in former experiment and calculation, the result is 10^(-5)eV order.
Why there are so huge difference?
Is my calculation method correct?
Thank you in advance~
Last edited by skythinker on Sat May 10, 2008 2:48 am, edited 1 time in total.
-
- Global Moderator
- Posts: 1817
- Joined: Mon Nov 18, 2019 11:00 am
Re: About magnetic anisotropy calculation
Hi,
We're sorry that we didn’t answer your question. This does not live up to the quality of support that we aim to provide. The team has since expanded. If we can still help with your problem, please ask again in a new post, linking to this one, and we will answer as quickly as possible.
Best wishes,
VASP